1947 Jaguar Mark IV vs. 1980 Reliant SE6
To start off, 1980 Reliant SE6 is newer by 33 year(s). Which means there will be less support and parts availability for 1947 Jaguar Mark IV. In addition, the cost of maintenance, including insurance, on 1947 Jaguar Mark IV would be higher. At 3,485 cc (6 cylinders), 1947 Jaguar Mark IV is equipped with a bigger engine. In terms of performance, 1980 Reliant SE6 (133 HP @ 5500 RPM) has 10 more horse power than 1947 Jaguar Mark IV. (123 HP @ 4250 RPM) In normal driving conditions, 1980 Reliant SE6 should accelerate faster than 1947 Jaguar Mark IV. With that said, vehicle weight also plays an important factor in acceleration. 1947 Jaguar Mark IV weights approximately 540 kg more than 1980 Reliant SE6.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1947 Jaguar Mark IV (250 Nm @ 2000 RPM) has 17 more torque (in Nm) than 1980 Reliant SE6. (233 Nm @ 3000 RPM). This means 1947 Jaguar Mark IV will have an easier job in driving up hills or pulling heavy equipment than 1980 Reliant SE6.
Compare all specifications:
1947 Jaguar Mark IV | 1980 Reliant SE6 | |
Make | Jaguar | Reliant |
Model | Mark IV | SE6 |
Year Released | 1947 | 1980 |
Engine Position | Front | Front |
Engine Size | 3485 cc | 2994 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 123 HP | 133 HP |
Engine RPM | 4250 RPM | 5500 RPM |
Torque | 250 Nm | 233 Nm |
Torque RPM | 2000 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1790 kg | 1250 kg |
Vehicle Length | 4730 mm | 4450 mm |
Vehicle Width | 1680 mm | 1710 mm |
Wheelbase Size | 3060 mm | 2650 mm |