1948 Allard J1 vs. 1995 Italdesign Nazca

To start off, 1995 Italdesign Nazca is newer by 47 year(s). Which means there will be less support and parts availability for 1948 Allard J1. In addition, the cost of maintenance, including insurance, on 1948 Allard J1 would be higher. At 4,987 cc (12 cylinders), 1995 Italdesign Nazca is equipped with a bigger engine. In terms of performance, 1995 Italdesign Nazca (346 HP @ 5200 RPM) has 246 more horse power than 1948 Allard J1. (100 HP @ 3800 RPM) In normal driving conditions, 1995 Italdesign Nazca should accelerate faster than 1948 Allard J1. With that said, vehicle weight also plays an important factor in acceleration. 1948 Allard J1 weights approximately 140 kg more than 1995 Italdesign Nazca.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Italdesign Nazca (470 Nm @ 4000 RPM) has 165 more torque (in Nm) than 1948 Allard J1. (305 Nm @ 2500 RPM). This means 1995 Italdesign Nazca will have an easier job in driving up hills or pulling heavy equipment than 1948 Allard J1.

Compare all specifications:

1948 Allard J1 1995 Italdesign Nazca
Make Allard Italdesign
Model J1 Nazca
Year Released 1948 1995
Engine Position Front Middle
Engine Size 3915 cc 4987 cc
Engine Cylinders 8 cylinders 12 cylinders
Engine Type in-line V
Horse Power 100 HP 346 HP
Engine RPM 3800 RPM 5200 RPM
Torque 305 Nm 470 Nm
Torque RPM 2500 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1140 kg 1000 kg
Vehicle Length 3690 mm 4400 mm
Vehicle Width 1480 mm 2090 mm
Vehicle Height 1510 mm 1110 mm
Wheelbase Size 2440 mm 2610 mm