1948 Allard J1 vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 60 year(s). Which means there will be less support and parts availability for 1948 Allard J1. In addition, the cost of maintenance, including insurance, on 1948 Allard J1 would be higher. At 3,915 cc (8 cylinders), 1948 Allard J1 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 3 weights approximately 51 kg more than 1948 Allard J1.

Because 1948 Allard J1 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1948 Allard J1. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1948 Allard J1 (305 Nm @ 2500 RPM) has 159 more torque (in Nm) than 2008 Mazda 3. (146 Nm @ 4000 RPM). This means 1948 Allard J1 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.

Compare all specifications:

1948 Allard J1 2008 Mazda 3
Make Allard Mazda
Model J1 3
Year Released 1948 2008
Engine Position Front Front
Engine Size 3915 cc 1598 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 100 HP 0 HP
Torque 305 Nm 146 Nm
Torque RPM 2500 RPM 4000 RPM
Engine Bore Size 81 mm 78 mm
Engine Stroke Size 95.3 mm 83.6 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1140 kg 1191 kg
Vehicle Length 3690 mm 4500 mm
Vehicle Width 1480 mm 1760 mm
Vehicle Height 1510 mm 1470 mm
Wheelbase Size 2440 mm 2650 mm
Fuel Tank Capacity 113 L 55 L