1948 Allard J1 vs. 2013 Chrysler 200 CONVERTIBLE
To start off, 2013 Chrysler 200 CONVERTIBLE is newer by 65 year(s). Which means there will be less support and parts availability for 1948 Allard J1. In addition, the cost of maintenance, including insurance, on 1948 Allard J1 would be higher. At 3,915 cc (8 cylinders), 1948 Allard J1 is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 CONVERTIBLE (279 HP @ 6400 RPM) has 179 more horse power than 1948 Allard J1. (100 HP @ 3800 RPM) In normal driving conditions, 2013 Chrysler 200 CONVERTIBLE should accelerate faster than 1948 Allard J1. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 CONVERTIBLE weights approximately 674 kg more than 1948 Allard J1. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1948 Allard J1 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1948 Allard J1. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200 CONVERTIBLE, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 CONVERTIBLE (353 Nm @ 4400 RPM) has 48 more torque (in Nm) than 1948 Allard J1. (305 Nm @ 2500 RPM). This means 2013 Chrysler 200 CONVERTIBLE will have an easier job in driving up hills or pulling heavy equipment than 1948 Allard J1. 2013 Chrysler 200 CONVERTIBLE has automatic transmission and 1948 Allard J1 has manual transmission. 1948 Allard J1 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 CONVERTIBLE will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1948 Allard J1 | 2013 Chrysler 200 CONVERTIBLE | |
| Make | Allard | Chrysler |
| Model | J1 | 200 CONVERTIBLE |
| Year Released | 1948 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 3915 cc | 3600 cc |
| Engine Cylinders | 8 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 100 HP | 279 HP |
| Engine RPM | 3800 RPM | 6400 RPM |
| Torque | 305 Nm | 353 Nm |
| Torque RPM | 2500 RPM | 4400 RPM |
| Engine Bore Size | 81 mm | 96 mm |
| Engine Stroke Size | 95.3 mm | 83 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 6-speed automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1140 kg | 1814 kg |
| Vehicle Length | 3690 mm | 4947 mm |
| Vehicle Width | 1480 mm | 2089 mm |
| Vehicle Height | 1510 mm | 1470 mm |
| Wheelbase Size | 2440 mm | 2765 mm |
| Fuel Tank Capacity | 113 L | 64 L |
