1948 Austin A 70 vs. 1965 Pontiac Tempest
To start off, 1965 Pontiac Tempest is newer by 17 year(s). Which means there will be less support and parts availability for 1948 Austin A 70. In addition, the cost of maintenance, including insurance, on 1948 Austin A 70 would be higher. At 3,522 cc (6 cylinders), 1965 Pontiac Tempest is equipped with a bigger engine. In terms of performance, 1965 Pontiac Tempest (118 HP @ 4200 RPM) has 55 more horse power than 1948 Austin A 70. (63 HP @ 3800 RPM) In normal driving conditions, 1965 Pontiac Tempest should accelerate faster than 1948 Austin A 70. With that said, vehicle weight also plays an important factor in acceleration. 1965 Pontiac Tempest weights approximately 80 kg more than 1948 Austin A 70. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1948 Austin A 70 | 1965 Pontiac Tempest | |
| Make | Austin | Pontiac |
| Model | A 70 | Tempest |
| Year Released | 1948 | 1965 |
| Engine Position | Front | Front |
| Engine Size | 2198 cc | 3522 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 63 HP | 118 HP |
| Engine RPM | 3800 RPM | 4200 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 1270 kg | 1350 kg |
| Vehicle Length | 4150 mm | 5160 mm |
| Vehicle Width | 1690 mm | 1820 mm |
| Wheelbase Size | 2440 mm | 2930 mm |
