1948 Austin A 90 vs. 2002 Chrysler 300

To start off, 2002 Chrysler 300 is newer by 54 year(s). Which means there will be less support and parts availability for 1948 Austin A 90. In addition, the cost of maintenance, including insurance, on 1948 Austin A 90 would be higher. At 3,523 cc (6 cylinders), 2002 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2002 Chrysler 300 (251 HP @ 6400 RPM) has 164 more horse power than 1948 Austin A 90. (87 HP @ 4000 RPM) In normal driving conditions, 2002 Chrysler 300 should accelerate faster than 1948 Austin A 90. With that said, vehicle weight also plays an important factor in acceleration. 2002 Chrysler 300 weights approximately 273 kg more than 1948 Austin A 90. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1948 Austin A 90 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1948 Austin A 90. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler 300, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Chrysler 300 (346 Nm @ 3900 RPM) has 156 more torque (in Nm) than 1948 Austin A 90. (190 Nm @ 2500 RPM). This means 2002 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1948 Austin A 90. 2002 Chrysler 300 has automatic transmission and 1948 Austin A 90 has manual transmission. 1948 Austin A 90 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

1948 Austin A 90 2002 Chrysler 300
Make Austin Chrysler
Model A 90 300
Year Released 1948 2002
Engine Position Front Front
Engine Size 2660 cc 3523 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 87 HP 251 HP
Engine RPM 4000 RPM 6400 RPM
Torque 190 Nm 346 Nm
Torque RPM 2500 RPM 3900 RPM
Engine Bore Size 87.3 mm 96 mm
Engine Stroke Size 111.1 mm 81 mm
Engine Compression Ratio 7.5:1 9.9:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 1360 kg 1633 kg
Vehicle Length 4520 mm 5030 mm
Vehicle Width 1780 mm 1900 mm
Vehicle Height 1530 mm 1420 mm
Wheelbase Size 2440 mm 2880 mm
Fuel Tank Capacity 34 L 65 L