1948 GAZ M-20 vs. 1968 Jensen FF
To start off, 1968 Jensen FF is newer by 20 year(s). Which means there will be less support and parts availability for 1948 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1948 GAZ M-20 would be higher. At 6,276 cc (8 cylinders), 1968 Jensen FF is equipped with a bigger engine. In terms of performance, 1968 Jensen FF (279 HP @ 4600 RPM) has 228 more horse power than 1948 GAZ M-20. (51 HP @ 3600 RPM) In normal driving conditions, 1968 Jensen FF should accelerate faster than 1948 GAZ M-20. With that said, vehicle weight also plays an important factor in acceleration. 1968 Jensen FF weights approximately 515 kg more than 1948 GAZ M-20. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1968 Jensen FF (587 Nm @ 2800 RPM) has 462 more torque (in Nm) than 1948 GAZ M-20. (125 Nm @ 2200 RPM). This means 1968 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 1948 GAZ M-20.
Compare all specifications:
| 1948 GAZ M-20 | 1968 Jensen FF | |
| Make | GAZ | Jensen |
| Model | M-20 | FF |
| Year Released | 1948 | 1968 |
| Engine Size | 2120 cc | 6276 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 51 HP | 279 HP |
| Engine RPM | 3600 RPM | 4600 RPM |
| Torque | 125 Nm | 587 Nm |
| Torque RPM | 2200 RPM | 2800 RPM |
| Fuel Type | Gasoline | Gasoline |
| Vehicle Weight | 1460 kg | 1975 kg |
| Vehicle Length | 4670 mm | 4860 mm |
| Vehicle Width | 1900 mm | 1760 mm |
| Vehicle Height | 1650 mm | 1360 mm |
| Wheelbase Size | 2710 mm | 2780 mm |
