1948 GAZ M-20 vs. 1977 Holden GTS

To start off, 1977 Holden GTS is newer by 29 year(s). Which means there will be less support and parts availability for 1948 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1948 GAZ M-20 would be higher. At 4,139 cc (8 cylinders), 1977 Holden GTS is equipped with a bigger engine. In terms of performance, 1977 Holden GTS (158 HP @ 4550 RPM) has 107 more horse power than 1948 GAZ M-20. (51 HP @ 3600 RPM) In normal driving conditions, 1977 Holden GTS should accelerate faster than 1948 GAZ M-20. With that said, vehicle weight also plays an important factor in acceleration. 1977 Holden GTS weights approximately 15 kg more than 1948 GAZ M-20. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden GTS (326 Nm @ 2600 RPM) has 201 more torque (in Nm) than 1948 GAZ M-20. (125 Nm @ 2200 RPM). This means 1977 Holden GTS will have an easier job in driving up hills or pulling heavy equipment than 1948 GAZ M-20. 1977 Holden GTS has automatic transmission and 1948 GAZ M-20 has manual transmission. 1948 GAZ M-20 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1977 Holden GTS will be easier to drive especially in heavy traffic.

Compare all specifications: