1948 GAZ M-20 vs. 1981 Seat 127

To start off, 1981 Seat 127 is newer by 33 year(s). Which means there will be less support and parts availability for 1948 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1948 GAZ M-20 would be higher. At 2,120 cc (4 cylinders), 1948 GAZ M-20 is equipped with a bigger engine. In terms of performance, 1948 GAZ M-20 (51 HP @ 3600 RPM) has 4 more horse power than 1981 Seat 127. (47 HP @ 6200 RPM). In normal driving conditions, 1948 GAZ M-20 should accelerate faster than 1981 Seat 127. With that said, vehicle weight also plays an important factor in acceleration. 1948 GAZ M-20 weights approximately 755 kg more than 1981 Seat 127. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1948 GAZ M-20 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1948 GAZ M-20. However, in wet, icy, snow, or gravel driving conditions, 1981 Seat 127, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1948 GAZ M-20 (125 Nm @ 2200 RPM) has 62 more torque (in Nm) than 1981 Seat 127. (63 Nm @ 3500 RPM). This means 1948 GAZ M-20 will have an easier job in driving up hills or pulling heavy equipment than 1981 Seat 127.

Compare all specifications:

1948 GAZ M-20 1981 Seat 127
Make GAZ Seat
Model M-20 127
Year Released 1948 1981
Engine Size 2120 cc 901 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 51 HP 47 HP
Engine RPM 3600 RPM 6200 RPM
Torque 125 Nm 63 Nm
Torque RPM 2200 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Vehicle Weight 1460 kg 705 kg
Vehicle Length 4670 mm 3600 mm
Vehicle Width 1900 mm 1530 mm
Vehicle Height 1650 mm 1380 mm
Wheelbase Size 2710 mm 2230 mm