1948 Humber Pullman vs. 1976 Matra-Simca Bagheera
To start off, 1976 Matra-Simca Bagheera is newer by 28 year(s). Which means there will be less support and parts availability for 1948 Humber Pullman. In addition, the cost of maintenance, including insurance, on 1948 Humber Pullman would be higher. At 4,086 cc (6 cylinders), 1948 Humber Pullman is equipped with a bigger engine. In terms of performance, 1948 Humber Pullman (100 HP @ 3400 RPM) has 15 more horse power than 1976 Matra-Simca Bagheera. (85 HP @ 5800 RPM). In normal driving conditions, 1948 Humber Pullman should accelerate faster than 1976 Matra-Simca Bagheera. With that said, vehicle weight also plays an important factor in acceleration. 1948 Humber Pullman weights approximately 1120 kg more than 1976 Matra-Simca Bagheera. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1948 Humber Pullman | 1976 Matra-Simca Bagheera | |
| Make | Humber | Matra-Simca |
| Model | Pullman | Bagheera |
| Year Released | 1948 | 1976 |
| Engine Position | Front | Middle |
| Engine Size | 4086 cc | 1442 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 100 HP | 85 HP |
| Engine RPM | 3400 RPM | 5800 RPM |
| Engine Bore Size | 85 mm | 76.7 mm |
| Engine Stroke Size | 120 mm | 78 mm |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 8 seats | 3 seats |
| Number of Doors | 4 doors | 3 doors |
| Vehicle Weight | 2100 kg | 980 kg |
| Vehicle Length | 5350 mm | 4020 mm |
| Vehicle Width | 1900 mm | 1740 mm |
| Wheelbase Size | 3330 mm | 2380 mm |
