1948 Jeep Jeepster vs. 1988 Lada 2105
To start off, 1988 Lada 2105 is newer by 40 year(s). Which means there will be less support and parts availability for 1948 Jeep Jeepster. In addition, the cost of maintenance, including insurance, on 1948 Jeep Jeepster would be higher. At 2,199 cc (4 cylinders), 1948 Jeep Jeepster is equipped with a bigger engine. In terms of performance, both vehicles can yield 59 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1948 Jeep Jeepster weights approximately 165 kg more than 1988 Lada 2105.
Because 1948 Jeep Jeepster is four wheel drive (4WD), it will have significant more traction and grip than 1988 Lada 2105. In wet, icy, snow, or gravel driving conditions, 1948 Jeep Jeepster will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1948 Jeep Jeepster (145 Nm @ 3600 RPM) has 35 more torque (in Nm) than 1988 Lada 2105. (110 Nm @ 3400 RPM). This means 1948 Jeep Jeepster will have an easier job in driving up hills or pulling heavy equipment than 1988 Lada 2105.
Compare all specifications:
| 1948 Jeep Jeepster | 1988 Lada 2105 | |
| Make | Jeep | Lada |
| Model | Jeepster | 2105 |
| Year Released | 1948 | 1988 |
| Engine Position | Front | Front |
| Engine Size | 2199 cc | 1198 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 59 HP | 59 HP |
| Engine RPM | 3600 RPM | 5600 RPM |
| Torque | 145 Nm | 110 Nm |
| Torque RPM | 3600 RPM | 3400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | 4WD | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1165 kg | 1000 kg |
| Vehicle Length | 4530 mm | 4140 mm |
| Vehicle Width | 1840 mm | 1630 mm |
| Vehicle Height | 1530 mm | 1450 mm |
| Wheelbase Size | 2650 mm | 2430 mm |
