1948 Morris Oxford vs. 1983 Lancia Trevi

To start off, 1983 Lancia Trevi is newer by 35 year(s). Which means there will be less support and parts availability for 1948 Morris Oxford. In addition, the cost of maintenance, including insurance, on 1948 Morris Oxford would be higher. At 1,585 cc (4 cylinders), 1983 Lancia Trevi is equipped with a bigger engine. In terms of performance, 1983 Lancia Trevi (100 HP @ 5800 RPM) has 60 more horse power than 1948 Morris Oxford. (40 HP @ 4200 RPM) In normal driving conditions, 1983 Lancia Trevi should accelerate faster than 1948 Morris Oxford. With that said, vehicle weight also plays an important factor in acceleration. 1983 Lancia Trevi weights approximately 145 kg more than 1948 Morris Oxford. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1948 Morris Oxford is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1948 Morris Oxford. However, in wet, icy, snow, or gravel driving conditions, 1983 Lancia Trevi, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1983 Lancia Trevi (134 Nm @ 3000 RPM) has 46 more torque (in Nm) than 1948 Morris Oxford. (88 Nm @ 1800 RPM). This means 1983 Lancia Trevi will have an easier job in driving up hills or pulling heavy equipment than 1948 Morris Oxford. 1983 Lancia Trevi has automatic transmission and 1948 Morris Oxford has manual transmission. 1948 Morris Oxford will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1983 Lancia Trevi will be easier to drive especially in heavy traffic.

Compare all specifications:

1948 Morris Oxford 1983 Lancia Trevi
Make Morris Lancia
Model Oxford Trevi
Year Released 1948 1983
Engine Position Front Front
Engine Size 1474 cc 1585 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 40 HP 100 HP
Engine RPM 4200 RPM 5800 RPM
Torque 88 Nm 134 Nm
Torque RPM 1800 RPM 3000 RPM
Engine Bore Size 73.5 mm 84 mm
Engine Stroke Size 87 mm 71.5 mm
Engine Compression Ratio 6.6:1 9.4:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1000 kg 1145 kg
Vehicle Length 4220 mm 4330 mm
Vehicle Width 1660 mm 1720 mm
Vehicle Height 1630 mm 1410 mm
Wheelbase Size 2470 mm 2550 mm
Fuel Tank Capacity 40 L 52 L