1949 Allard J1 vs. 2006 Mazda RX-8

To start off, 2006 Mazda RX-8 is newer by 57 year(s). Which means there will be less support and parts availability for 1949 Allard J1. In addition, the cost of maintenance, including insurance, on 1949 Allard J1 would be higher. At 3,622 cc (8 cylinders), 1949 Allard J1 is equipped with a bigger engine. In terms of performance, 2006 Mazda RX-8 (212 HP @ 7500 RPM) has 127 more horse power than 1949 Allard J1. (85 HP @ 3800 RPM) In normal driving conditions, 2006 Mazda RX-8 should accelerate faster than 1949 Allard J1.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Mazda RX-8 (216 Nm @ 5500 RPM) has 13 more torque (in Nm) than 1949 Allard J1. (203 Nm @ 1500 RPM). This means 2006 Mazda RX-8 will have an easier job in driving up hills or pulling heavy equipment than 1949 Allard J1. 2006 Mazda RX-8 has automatic transmission and 1949 Allard J1 has manual transmission. 1949 Allard J1 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Mazda RX-8 will be easier to drive especially in heavy traffic.

Compare all specifications:

1949 Allard J1 2006 Mazda RX-8
Make Allard Mazda
Model J1 RX-8
Year Released 1949 2006
Engine Position Front Front
Engine Size 3622 cc 1311 cc
Engine Type in-line dual-disk rotary
Horse Power 85 HP 212 HP
Engine RPM 3800 RPM 7500 RPM
Torque 203 Nm 216 Nm
Torque RPM 1500 RPM 5500 RPM
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 4 doors
Vehicle Length 3690 mm 4430 mm
Vehicle Width 1480 mm 1780 mm
Vehicle Height 1510 mm 1350 mm
Wheelbase Size 2440 mm 2710 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]