1949 Allard J1 vs. 2012 Fiat 500

To start off, 2012 Fiat 500 is newer by 63 year(s). Which means there will be less support and parts availability for 1949 Allard J1. In addition, the cost of maintenance, including insurance, on 1949 Allard J1 would be higher. At 3,917 cc (8 cylinders), 1949 Allard J1 is equipped with a bigger engine. In terms of performance, 1949 Allard J1 (100 HP @ 3800 RPM) has 32 more horse power than 2012 Fiat 500. (68 HP @ 5500 RPM). In normal driving conditions, 1949 Allard J1 should accelerate faster than 2012 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1949 Allard J1 weights approximately 200 kg more than 2012 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1949 Allard J1 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1949 Allard J1. However, in wet, icy, snow, or gravel driving conditions, 2012 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1949 Allard J1 (306 Nm @ 2500 RPM) has 204 more torque (in Nm) than 2012 Fiat 500. (102 Nm @ 3000 RPM). This means 1949 Allard J1 will have an easier job in driving up hills or pulling heavy equipment than 2012 Fiat 500. 2012 Fiat 500 has automatic transmission and 1949 Allard J1 has manual transmission. 1949 Allard J1 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Fiat 500 will be easier to drive especially in heavy traffic.

Compare all specifications:

1949 Allard J1 2012 Fiat 500
Make Allard Fiat
Model J1 500
Year Released 1949 2012
Engine Position Front Front
Engine Size 3917 cc 1242 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 100 HP 68 HP
Engine RPM 3800 RPM 5500 RPM
Torque 306 Nm 102 Nm
Torque RPM 2500 RPM 3000 RPM
Engine Bore Size 81 mm 70.8 mm
Engine Stroke Size 95.3 mm 78.9 mm
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 3 doors
Vehicle Weight 1140 kg 940 kg
Vehicle Length 3690 mm 3550 mm
Vehicle Width 1480 mm 1630 mm
Vehicle Height 1510 mm 1490 mm
Wheelbase Size 2440 mm 2310 mm
Fuel Tank Capacity 90 L 35 L