1949 Austin 16 vs. 2008 Chrysler Aspen

To start off, 2008 Chrysler Aspen is newer by 59 year(s). Which means there will be less support and parts availability for 1949 Austin 16. In addition, the cost of maintenance, including insurance, on 1949 Austin 16 would be higher. At 4,701 cc (8 cylinders), 2008 Chrysler Aspen is equipped with a bigger engine. In terms of performance, 2008 Chrysler Aspen (303 HP @ 5650 RPM) has 240 more horse power than 1949 Austin 16. (63 HP @ 3800 RPM) In normal driving conditions, 2008 Chrysler Aspen should accelerate faster than 1949 Austin 16. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Aspen weights approximately 535 kg more than 1949 Austin 16. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Chrysler Aspen is four wheel drive (4WD), it will have significant more traction and grip than 1949 Austin 16. In wet, icy, snow, or gravel driving conditions, 2008 Chrysler Aspen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Aspen (447 Nm @ 3950 RPM) has 300 more torque (in Nm) than 1949 Austin 16. (147 Nm @ 2200 RPM). This means 2008 Chrysler Aspen will have an easier job in driving up hills or pulling heavy equipment than 1949 Austin 16. 2008 Chrysler Aspen has automatic transmission and 1949 Austin 16 has manual transmission. 1949 Austin 16 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Aspen will be easier to drive especially in heavy traffic.

Compare all specifications:

1949 Austin 16 2008 Chrysler Aspen
Make Austin Chrysler
Model 16 Aspen
Year Released 1949 2008
Engine Position Front Front
Engine Size 2200 cc 4701 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 63 HP 303 HP
Engine RPM 3800 RPM 5650 RPM
Torque 147 Nm 447 Nm
Torque RPM 2200 RPM 3950 RPM
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 8 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1280 kg 1815 kg
Vehicle Length 4350 mm 5110 mm
Vehicle Width 1710 mm 1940 mm
Vehicle Height 1690 mm 1890 mm
Wheelbase Size 2660 mm 3030 mm
Fuel Tank Capacity 63 L 102 L