1949 Bristol 402 vs. 2008 Chrysler Sebring
To start off, 2008 Chrysler Sebring is newer by 59 year(s). Which means there will be less support and parts availability for 1949 Bristol 402. In addition, the cost of maintenance, including insurance, on 1949 Bristol 402 would be higher. At 2,360 cc (4 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (173 HP @ 6000 RPM) has 88 more horse power than 1949 Bristol 402. (85 HP @ 4500 RPM) In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1949 Bristol 402. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 590 kg more than 1949 Bristol 402. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1949 Bristol 402 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1949 Bristol 402. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (225 Nm @ 4400 RPM) has 80 more torque (in Nm) than 1949 Bristol 402. (145 Nm @ 3500 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1949 Bristol 402. 2008 Chrysler Sebring has automatic transmission and 1949 Bristol 402 has manual transmission. 1949 Bristol 402 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1949 Bristol 402 | 2008 Chrysler Sebring | |
Make | Bristol | Chrysler |
Model | 402 | Sebring |
Year Released | 1949 | 2008 |
Engine Position | Front | Front |
Engine Size | 1971 cc | 2360 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 85 HP | 173 HP |
Engine RPM | 4500 RPM | 6000 RPM |
Torque | 145 Nm | 225 Nm |
Torque RPM | 3500 RPM | 4400 RPM |
Engine Compression Ratio | 7.5:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1225 kg | 1815 kg |
Vehicle Length | 4870 mm | 4930 mm |
Vehicle Width | 1710 mm | 1820 mm |
Vehicle Height | 1530 mm | 1490 mm |
Wheelbase Size | 2900 mm | 2770 mm |
Fuel Tank Capacity | 77 L | 64 L |