1950 Allard J1 vs. 2008 Nissan X-Trail
To start off, 2008 Nissan X-Trail is newer by 58 year(s). Which means there will be less support and parts availability for 1950 Allard J1. In addition, the cost of maintenance, including insurance, on 1950 Allard J1 would be higher. At 3,622 cc (8 cylinders), 1950 Allard J1 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Nissan X-Trail weights approximately 374 kg more than 1950 Allard J1.
Because 2008 Nissan X-Trail is four wheel drive (4WD), it will have significant more traction and grip than 1950 Allard J1. In wet, icy, snow, or gravel driving conditions, 2008 Nissan X-Trail will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Nissan X-Trail (245 Nm @ 4000 RPM) has 42 more torque (in Nm) than 1950 Allard J1. (203 Nm @ 1500 RPM). This means 2008 Nissan X-Trail will have an easier job in driving up hills or pulling heavy equipment than 1950 Allard J1.
Compare all specifications:
| 1950 Allard J1 | 2008 Nissan X-Trail | |
| Make | Allard | Nissan |
| Model | J1 | X-Trail |
| Year Released | 1950 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 3622 cc | 2486 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 85 HP | 0 HP |
| Torque | 203 Nm | 245 Nm |
| Torque RPM | 1500 RPM | 4000 RPM |
| Engine Bore Size | 77.8 mm | 89 mm |
| Engine Stroke Size | 95.3 mm | 100 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | 4WD |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 5 seats |
| Vehicle Weight | 1020 kg | 1394 kg |
| Vehicle Length | 3690 mm | 4650 mm |
| Vehicle Height | 1510 mm | 1670 mm |
| Wheelbase Size | 2440 mm | 2630 mm |
