1950 Alvis TA 21 vs. 1993 Cadillac Seville
To start off, 1993 Cadillac Seville is newer by 43 year(s). Which means there will be less support and parts availability for 1950 Alvis TA 21. In addition, the cost of maintenance, including insurance, on 1950 Alvis TA 21 would be higher. At 4,564 cc (8 cylinders), 1993 Cadillac Seville is equipped with a bigger engine. In terms of performance, 1993 Cadillac Seville (295 HP @ 5600 RPM) has 202 more horse power than 1950 Alvis TA 21. (93 HP @ 4000 RPM) In normal driving conditions, 1993 Cadillac Seville should accelerate faster than 1950 Alvis TA 21. With that said, vehicle weight also plays an important factor in acceleration. 1993 Cadillac Seville weights approximately 112 kg more than 1950 Alvis TA 21. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1950 Alvis TA 21 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1950 Alvis TA 21. However, in wet, icy, snow, or gravel driving conditions, 1993 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Cadillac Seville (393 Nm @ 4400 RPM) has 189 more torque (in Nm) than 1950 Alvis TA 21. (204 Nm @ 2000 RPM). This means 1993 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1950 Alvis TA 21. 1993 Cadillac Seville has automatic transmission and 1950 Alvis TA 21 has manual transmission. 1950 Alvis TA 21 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1993 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
1950 Alvis TA 21 | 1993 Cadillac Seville | |
Make | Alvis | Cadillac |
Model | TA 21 | Seville |
Year Released | 1950 | 1993 |
Engine Position | Front | Front |
Engine Size | 2991 cc | 4564 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 93 HP | 295 HP |
Engine RPM | 4000 RPM | 5600 RPM |
Torque | 204 Nm | 393 Nm |
Torque RPM | 2000 RPM | 4400 RPM |
Engine Bore Size | 84 mm | 93 mm |
Engine Stroke Size | 90 mm | 84 mm |
Engine Compression Ratio | 7.1:1 | 10.3:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1448 kg | 1560 kg |
Vehicle Length | 4630 mm | 5200 mm |
Vehicle Width | 1680 mm | 1900 mm |
Vehicle Height | 1600 mm | 1380 mm |
Wheelbase Size | 2840 mm | 2830 mm |