1950 Austin A 40 vs. 2008 Fiat Palio
To start off, 2008 Fiat Palio is newer by 58 year(s). Which means there will be less support and parts availability for 1950 Austin A 40. In addition, the cost of maintenance, including insurance, on 1950 Austin A 40 would be higher. At 1,242 cc (4 cylinders), 2008 Fiat Palio is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Fiat Palio weights approximately 5 kg more than 1950 Austin A 40.
Because 1950 Austin A 40 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1950 Austin A 40. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Palio, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Fiat Palio (102 Nm @ 3250 RPM) has 19 more torque (in Nm) than 1950 Austin A 40. (83 Nm @ 3000 RPM). This means 2008 Fiat Palio will have an easier job in driving up hills or pulling heavy equipment than 1950 Austin A 40.
Compare all specifications:
1950 Austin A 40 | 2008 Fiat Palio | |
Make | Austin | Fiat |
Model | A 40 | Palio |
Year Released | 1950 | 2008 |
Engine Position | Front | Front |
Engine Size | 1198 cc | 1242 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 49 HP | 0 HP |
Torque | 83 Nm | 102 Nm |
Torque RPM | 3000 RPM | 3250 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 4 seats | 2 seats |
Number of Doors | 2 doors | 3 doors |
Vehicle Weight | 990 kg | 995 kg |
Vehicle Length | 4060 mm | 3830 mm |
Vehicle Width | 1560 mm | 1640 mm |
Vehicle Height | 1450 mm | 1440 mm |
Wheelbase Size | 2360 mm | 2380 mm |
Fuel Tank Capacity | 34 L | 54 L |