1950 Austin A 40 vs. 2008 Peugeot 307
To start off, 2008 Peugeot 307 is newer by 58 year(s). Which means there will be less support and parts availability for 1950 Austin A 40. In addition, the cost of maintenance, including insurance, on 1950 Austin A 40 would be higher. At 1,997 cc, 2008 Peugeot 307 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Peugeot 307 weights approximately 312 kg more than 1950 Austin A 40.
Because 1950 Austin A 40 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1950 Austin A 40. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 307, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Peugeot 307 (190 Nm @ 4100 RPM) has 106 more torque (in Nm) than 1950 Austin A 40. (84 Nm @ 2400 RPM). This means 2008 Peugeot 307 will have an easier job in driving up hills or pulling heavy equipment than 1950 Austin A 40.
Compare all specifications:
1950 Austin A 40 | 2008 Peugeot 307 | |
Make | Austin | Peugeot |
Model | A 40 | 307 |
Year Released | 1950 | 2008 |
Engine Position | Front | Front |
Engine Size | 1200 cc | 1997 cc |
Horse Power | 49 HP | 0 HP |
Torque | 84 Nm | 190 Nm |
Torque RPM | 2400 RPM | 4100 RPM |
Engine Bore Size | 65.5 mm | 85 mm |
Engine Stroke Size | 89 mm | 88 mm |
Engine Compression Ratio | 7.2:1 | 10.8:1 |
Top Speed | 127 km/hour | 204 km/hour |
Drive Type | Rear | Front |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 966 kg | 1278 kg |
Vehicle Length | 4060 mm | 4210 mm |
Vehicle Width | 1560 mm | 1740 mm |
Vehicle Height | 1470 mm | 1520 mm |
Wheelbase Size | 2360 mm | 2610 mm |
Fuel Tank Capacity | 34 L | 50 L |