1950 Austin A 70 vs. 1942 Oldsmobile 66
To start off, 1950 Austin A 70 is newer by 8 year(s). Which means there will be less support and parts availability for 1942 Oldsmobile 66. In addition, the cost of maintenance, including insurance, on 1942 Oldsmobile 66 would be higher. At 3,903 cc (6 cylinders), 1942 Oldsmobile 66 is equipped with a bigger engine. In terms of performance, 1942 Oldsmobile 66 (100 HP @ 3400 RPM) has 34 more horse power than 1950 Austin A 70. (66 HP @ 3800 RPM) In normal driving conditions, 1942 Oldsmobile 66 should accelerate faster than 1950 Austin A 70. With that said, vehicle weight also plays an important factor in acceleration. 1942 Oldsmobile 66 weights approximately 430 kg more than 1950 Austin A 70. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1950 Austin A 70 | 1942 Oldsmobile 66 | |
Make | Austin | Oldsmobile |
Model | A 70 | 66 |
Year Released | 1950 | 1942 |
Engine Position | Front | Front |
Engine Size | 2199 cc | 3903 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 66 HP | 100 HP |
Engine RPM | 3800 RPM | 3400 RPM |
Engine Bore Size | 79.4 mm | 88.9 mm |
Engine Stroke Size | 111.1 mm | 104.8 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1340 kg | 1770 kg |
Vehicle Length | 4260 mm | 5190 mm |
Vehicle Width | 1780 mm | 1920 mm |
Wheelbase Size | 2520 mm | 3030 mm |