1950 Austin A 70 vs. 2013 Fiat 500
To start off, 2013 Fiat 500 is newer by 63 year(s). Which means there will be less support and parts availability for 1950 Austin A 70. In addition, the cost of maintenance, including insurance, on 1950 Austin A 70 would be higher. At 2,200 cc (4 cylinders), 1950 Austin A 70 is equipped with a bigger engine. In terms of performance, 2013 Fiat 500 (101 HP @ 6500 RPM) has 38 more horse power than 1950 Austin A 70. (63 HP @ 3800 RPM) In normal driving conditions, 2013 Fiat 500 should accelerate faster than 1950 Austin A 70. With that said, vehicle weight also plays an important factor in acceleration. 1950 Austin A 70 weights approximately 174 kg more than 2013 Fiat 500.
Because 1950 Austin A 70 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1950 Austin A 70. However, in wet, icy, snow, or gravel driving conditions, 2013 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1950 Austin A 70 | 2013 Fiat 500 | |
Make | Austin | Fiat |
Model | A 70 | 500 |
Year Released | 1950 | 2013 |
Engine Position | Front | Front |
Engine Size | 2200 cc | 1368 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 63 HP | 101 HP |
Engine RPM | 3800 RPM | 6500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | 5-speed manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1270 kg | 1096 kg |
Vehicle Length | 4150 mm | 3546 mm |
Vehicle Width | 1690 mm | 1628 mm |
Vehicle Height | 1900 mm | 1519 mm |
Wheelbase Size | 2440 mm | 2301 mm |
Fuel Tank Capacity | 63 L | 40 L |