1950 Austin A135 vs. 1992 BMW 538

To start off, 1992 BMW 538 is newer by 42 year(s). Which means there will be less support and parts availability for 1950 Austin A135. In addition, the cost of maintenance, including insurance, on 1950 Austin A135 would be higher. At 3,993 cc (6 cylinders), 1950 Austin A135 is equipped with a bigger engine. In terms of performance, 1992 BMW 538 (341 HP @ 6900 RPM) has 217 more horse power than 1950 Austin A135. (124 HP @ 3800 RPM) In normal driving conditions, 1992 BMW 538 should accelerate faster than 1950 Austin A135. With that said, vehicle weight also plays an important factor in acceleration. 1950 Austin A135 weights approximately 190 kg more than 1992 BMW 538.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 BMW 538 (400 Nm @ 4750 RPM) has 112 more torque (in Nm) than 1950 Austin A135. (288 Nm @ 2200 RPM). This means 1992 BMW 538 will have an easier job in driving up hills or pulling heavy equipment than 1950 Austin A135.

Compare all specifications:

1950 Austin A135 1992 BMW 538
Make Austin BMW
Model A135 538
Year Released 1950 1992
Engine Position Front Front
Engine Size 3993 cc 3795 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 124 HP 341 HP
Engine RPM 3800 RPM 6900 RPM
Torque 288 Nm 400 Nm
Torque RPM 2200 RPM 4750 RPM
Engine Bore Size 87.4 mm 94.6 mm
Engine Stroke Size 111.1 mm 90 mm
Engine Compression Ratio 6.8:1 10.5:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 2020 kg 1830 kg
Vehicle Length 4880 mm 4730 mm
Vehicle Width 1850 mm 1760 mm
Vehicle Height 1710 mm 1400 mm