1950 Fiat 1500 vs. 2013 Infiniti IPL
To start off, 2013 Infiniti IPL is newer by 63 year(s). Which means there will be less support and parts availability for 1950 Fiat 1500. In addition, the cost of maintenance, including insurance, on 1950 Fiat 1500 would be higher. At 3,696 cc (4 cylinders), 2013 Infiniti IPL is equipped with a bigger engine. In terms of performance, 2013 Infiniti IPL (343 HP @ 7400 RPM) has 296 more horse power than 1950 Fiat 1500. (47 HP @ 4400 RPM) In normal driving conditions, 2013 Infiniti IPL should accelerate faster than 1950 Fiat 1500. With that said, vehicle weight also plays an important factor in acceleration. 2013 Infiniti IPL weights approximately 513 kg more than 1950 Fiat 1500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1950 Fiat 1500 | 2013 Infiniti IPL | |
Make | Fiat | Infiniti |
Model | 1500 | IPL |
Year Released | 1950 | 2013 |
Body Type | Sedan | Coupe |
Engine Position | Front | Rear |
Engine Size | 1493 cc | 3696 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 47 HP | 343 HP |
Engine RPM | 4400 RPM | 7400 RPM |
Engine Bore Size | 65 mm | 95 mm |
Engine Stroke Size | 75 mm | 86 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1200 kg | 1713 kg |
Vehicle Length | 4500 mm | 4650 mm |
Vehicle Width | 1600 mm | 1823 mm |
Vehicle Height | 1530 mm | 1406 mm |
Wheelbase Size | 2810 mm | 2850 mm |