1950 Ford Zephyr vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 58 year(s). Which means there will be less support and parts availability for 1950 Ford Zephyr. In addition, the cost of maintenance, including insurance, on 1950 Ford Zephyr would be higher. At 2,262 cc (6 cylinders), 1950 Ford Zephyr is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 3 weights approximately 35 kg more than 1950 Ford Zephyr.

Because 1950 Ford Zephyr is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1950 Ford Zephyr. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1950 Ford Zephyr (151 Nm @ 2000 RPM) has 5 more torque (in Nm) than 2008 Mazda 3. (146 Nm @ 4000 RPM). This means 1950 Ford Zephyr will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.

Compare all specifications:

1950 Ford Zephyr 2008 Mazda 3
Make Ford Mazda
Model Zephyr 3
Year Released 1950 2008
Engine Position Front Front
Engine Size 2262 cc 1598 cc
Valves per Cylinder 2 valves 4 valves
Horse Power 57 HP 0 HP
Torque 151 Nm 146 Nm
Torque RPM 2000 RPM 4000 RPM
Engine Bore Size 79.4 mm 78 mm
Engine Stroke Size 76.2 mm 83.6 mm
Engine Compression Ratio 6.8:1 10.0:1
Fuel Type Gasoline Gasoline
Top Speed 130 km/hour 183 km/hour
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1145 kg 1180 kg
Vehicle Length 4370 mm 4500 mm
Vehicle Width 1630 mm 1760 mm
Vehicle Height 1550 mm 1470 mm
Wheelbase Size 2650 mm 2650 mm
Fuel Tank Capacity 40 L 55 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]