1950 Holden FX vs. 1957 Rover P4
To start off, 1957 Rover P4 is newer by 7 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,165 cc (6 cylinders), 1950 Holden FX is equipped with a bigger engine. In terms of performance, both vehicles can yield 51 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1957 Rover P4 weights approximately 410 kg more than 1950 Holden FX.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1957 Rover P4 (138 Nm @ 2000 RPM) has 2 more torque (in Nm) than 1950 Holden FX. (136 Nm @ 2000 RPM). This means 1957 Rover P4 will have an easier job in driving up hills or pulling heavy equipment than 1950 Holden FX.
Compare all specifications:
1950 Holden FX | 1957 Rover P4 | |
Make | Holden | Rover |
Model | FX | P4 |
Year Released | 1950 | 1957 |
Engine Position | Front | Front |
Engine Size | 2165 cc | 1997 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 51 HP | 51 HP |
Torque | 136 Nm | 138 Nm |
Torque RPM | 2000 RPM | 2000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 970 kg | 1380 kg |
Vehicle Length | 4380 mm | 4550 mm |
Vehicle Width | 1710 mm | 1680 mm |
Vehicle Height | 1580 mm | 1620 mm |
Wheelbase Size | 2620 mm | 2830 mm |