1950 Holden FX vs. 1962 MG MGA
To start off, 1962 MG MGA is newer by 12 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,165 cc (6 cylinders), 1950 Holden FX is equipped with a bigger engine. In terms of performance, 1962 MG MGA (89 HP) has 38 more horse power than 1950 Holden FX. (51 HP) In normal driving conditions, 1962 MG MGA should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1950 Holden FX weights approximately 70 kg more than 1962 MG MGA.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 MG MGA (149 Nm @ 3000 RPM) has 13 more torque (in Nm) than 1950 Holden FX. (136 Nm @ 2000 RPM). This means 1962 MG MGA will have an easier job in driving up hills or pulling heavy equipment than 1950 Holden FX.
Compare all specifications:
1950 Holden FX | 1962 MG MGA | |
Make | Holden | MG |
Model | FX | MGA |
Year Released | 1950 | 1962 |
Engine Position | Front | Front |
Engine Size | 2165 cc | 1798 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 51 HP | 89 HP |
Torque | 136 Nm | 149 Nm |
Torque RPM | 2000 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 970 kg | 900 kg |
Vehicle Length | 4380 mm | 3970 mm |
Vehicle Width | 1710 mm | 1460 mm |
Vehicle Height | 1580 mm | 1280 mm |
Wheelbase Size | 2620 mm | 2390 mm |