1950 Holden FX vs. 1967 Isuzu Florian

To start off, 1967 Isuzu Florian is newer by 17 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,165 cc (6 cylinders), 1950 Holden FX is equipped with a bigger engine. In terms of performance, 1967 Isuzu Florian (83 HP) has 32 more horse power than 1950 Holden FX. (51 HP) In normal driving conditions, 1967 Isuzu Florian should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1967 Isuzu Florian weights approximately 20 kg more than 1950 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1950 Holden FX (136 Nm @ 2000 RPM) has 12 more torque (in Nm) than 1967 Isuzu Florian. (124 Nm @ 2600 RPM). This means 1950 Holden FX will have an easier job in driving up hills or pulling heavy equipment than 1967 Isuzu Florian.

Compare all specifications:

1950 Holden FX 1967 Isuzu Florian
Make Holden Isuzu
Model FX Florian
Year Released 1950 1967
Engine Position Front Front
Engine Size 2165 cc 1584 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 51 HP 83 HP
Torque 136 Nm 124 Nm
Torque RPM 2000 RPM 2600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 970 kg 990 kg
Vehicle Length 4380 mm 4020 mm
Vehicle Width 1710 mm 1500 mm
Vehicle Height 1580 mm 1330 mm
Wheelbase Size 2620 mm 2360 mm