1950 Holden FX vs. 1972 TVR 1600
To start off, 1972 TVR 1600 is newer by 22 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,165 cc (6 cylinders), 1950 Holden FX is equipped with a bigger engine. In terms of performance, 1972 TVR 1600 (84 HP) has 33 more horse power than 1950 Holden FX. (51 HP) In normal driving conditions, 1972 TVR 1600 should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1950 Holden FX weights approximately 74 kg more than 1972 TVR 1600.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1950 Holden FX (136 Nm @ 2000 RPM) has 11 more torque (in Nm) than 1972 TVR 1600. (125 Nm @ 3500 RPM). This means 1950 Holden FX will have an easier job in driving up hills or pulling heavy equipment than 1972 TVR 1600.
Compare all specifications:
1950 Holden FX | 1972 TVR 1600 | |
Make | Holden | TVR |
Model | FX | 1600 |
Year Released | 1950 | 1972 |
Engine Position | Front | Front |
Engine Size | 2165 cc | 1599 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 51 HP | 84 HP |
Torque | 136 Nm | 125 Nm |
Torque RPM | 2000 RPM | 3500 RPM |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 970 kg | 896 kg |
Vehicle Length | 4380 mm | 3950 mm |
Vehicle Width | 1710 mm | 1630 mm |
Vehicle Height | 1580 mm | 1200 mm |
Wheelbase Size | 2620 mm | 2290 mm |