1950 Holden FX vs. 1983 Talbot Horizon

To start off, 1983 Talbot Horizon is newer by 33 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,165 cc (6 cylinders), 1950 Holden FX is equipped with a bigger engine. In terms of performance, 1983 Talbot Horizon (58 HP) has 7 more horse power than 1950 Holden FX. (51 HP) In normal driving conditions, 1983 Talbot Horizon should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1950 Holden FX weights approximately 25 kg more than 1983 Talbot Horizon.

Because 1950 Holden FX is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1950 Holden FX. However, in wet, icy, snow, or gravel driving conditions, 1983 Talbot Horizon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1950 Holden FX (136 Nm @ 2000 RPM) has 45 more torque (in Nm) than 1983 Talbot Horizon. (91 Nm @ 3000 RPM). This means 1950 Holden FX will have an easier job in driving up hills or pulling heavy equipment than 1983 Talbot Horizon.

Compare all specifications:

1950 Holden FX 1983 Talbot Horizon
Make Holden Talbot
Model FX Horizon
Year Released 1950 1983
Engine Position Front Front
Engine Size 2165 cc 1118 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 51 HP 58 HP
Torque 136 Nm 91 Nm
Torque RPM 2000 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Vehicle Weight 970 kg 945 kg
Vehicle Length 4380 mm 3970 mm
Vehicle Width 1710 mm 1690 mm
Vehicle Height 1580 mm 1420 mm
Wheelbase Size 2620 mm 2530 mm