1950 Holden FX vs. 1996 Mercedes-Benz SLK

To start off, 1996 Mercedes-Benz SLK is newer by 46 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,165 cc (6 cylinders), 1950 Holden FX is equipped with a bigger engine. In terms of performance, 1996 Mercedes-Benz SLK (134 HP) has 83 more horse power than 1950 Holden FX. (51 HP) In normal driving conditions, 1996 Mercedes-Benz SLK should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1996 Mercedes-Benz SLK weights approximately 300 kg more than 1950 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Mercedes-Benz SLK (190 Nm @ 4000 RPM) has 54 more torque (in Nm) than 1950 Holden FX. (136 Nm @ 2000 RPM). This means 1996 Mercedes-Benz SLK will have an easier job in driving up hills or pulling heavy equipment than 1950 Holden FX.

Compare all specifications:

1950 Holden FX 1996 Mercedes-Benz SLK
Make Holden Mercedes-Benz
Model FX SLK
Year Released 1950 1996
Engine Position Front Front
Engine Size 2165 cc 1998 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 51 HP 134 HP
Torque 136 Nm 190 Nm
Torque RPM 2000 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 970 kg 1270 kg
Vehicle Length 4380 mm 4000 mm
Vehicle Width 1710 mm 1720 mm
Vehicle Height 1580 mm 1280 mm
Wheelbase Size 2620 mm 2410 mm