1950 Holden FX vs. 1997 Lancia K

To start off, 1997 Lancia K is newer by 47 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,165 cc (6 cylinders), 1950 Holden FX is equipped with a bigger engine. In terms of performance, 1997 Lancia K (155 HP) has 104 more horse power than 1950 Holden FX. (51 HP) In normal driving conditions, 1997 Lancia K should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1997 Lancia K weights approximately 470 kg more than 1950 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1950 Holden FX is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1950 Holden FX. However, in wet, icy, snow, or gravel driving conditions, 1997 Lancia K, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1997 Lancia K (186 Nm @ 4000 RPM) has 50 more torque (in Nm) than 1950 Holden FX. (136 Nm @ 2000 RPM). This means 1997 Lancia K will have an easier job in driving up hills or pulling heavy equipment than 1950 Holden FX.

Compare all specifications:

1950 Holden FX 1997 Lancia K
Make Holden Lancia
Model FX K
Year Released 1950 1997
Engine Position Front Front
Engine Size 2165 cc 1993 cc
Engine Cylinders 6 cylinders 5 cylinders
Engine Type in-line in-line
Horse Power 51 HP 155 HP
Torque 136 Nm 186 Nm
Torque RPM 2000 RPM 4000 RPM
Drive Type Rear Front
Transmission Type Manual Manual
Vehicle Weight 970 kg 1440 kg
Vehicle Length 4380 mm 4690 mm
Vehicle Width 1710 mm 1830 mm
Vehicle Height 1580 mm 1470 mm
Wheelbase Size 2620 mm 2710 mm