1950 Holden FX vs. 1999 TVR Griffith

To start off, 1999 TVR Griffith is newer by 49 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 3,946 cc (8 cylinders), 1999 TVR Griffith is equipped with a bigger engine. In terms of performance, 1999 TVR Griffith (225 HP) has 174 more horse power than 1950 Holden FX. (51 HP) In normal driving conditions, 1999 TVR Griffith should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1999 TVR Griffith weights approximately 90 kg more than 1950 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 TVR Griffith (373 Nm @ 4000 RPM) has 237 more torque (in Nm) than 1950 Holden FX. (136 Nm @ 2000 RPM). This means 1999 TVR Griffith will have an easier job in driving up hills or pulling heavy equipment than 1950 Holden FX.

Compare all specifications:

1950 Holden FX 1999 TVR Griffith
Make Holden TVR
Model FX Griffith
Year Released 1950 1999
Engine Position Front Front
Engine Size 2165 cc 3946 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line in-line
Horse Power 51 HP 225 HP
Torque 136 Nm 373 Nm
Torque RPM 2000 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 970 kg 1060 kg
Vehicle Length 4380 mm 3910 mm
Vehicle Width 1710 mm 1750 mm
Vehicle Height 1580 mm 1200 mm
Wheelbase Size 2620 mm 2290 mm