1950 Holden FX vs. 2010 Pontiac G3
To start off, 2010 Pontiac G3 is newer by 60 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,165 cc (6 cylinders), 1950 Holden FX is equipped with a bigger engine. In terms of performance, 2010 Pontiac G3 (105 HP) has 54 more horse power than 1950 Holden FX. (51 HP) In normal driving conditions, 2010 Pontiac G3 should accelerate faster than 1950 Holden FX.
Because 1950 Holden FX is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1950 Holden FX. However, in wet, icy, snow, or gravel driving conditions, 2010 Pontiac G3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Pontiac G3 (142 Nm @ 3800 RPM) has 6 more torque (in Nm) than 1950 Holden FX. (136 Nm @ 2000 RPM). This means 2010 Pontiac G3 will have an easier job in driving up hills or pulling heavy equipment than 1950 Holden FX.
Compare all specifications:
| 1950 Holden FX | 2010 Pontiac G3 | |
| Make | Holden | Pontiac |
| Model | FX | G3 |
| Year Released | 1950 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 2165 cc | 1599 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 51 HP | 105 HP |
| Torque | 136 Nm | 142 Nm |
| Torque RPM | 2000 RPM | 3800 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Vehicle Length | 4380 mm | 3940 mm |
| Vehicle Width | 1710 mm | 1690 mm |
| Vehicle Height | 1580 mm | 1510 mm |
| Wheelbase Size | 2620 mm | 2490 mm |
