1951 Allard K2 vs. 1980 Talbot 1510

To start off, 1980 Talbot 1510 is newer by 29 year(s). Which means there will be less support and parts availability for 1951 Allard K2. In addition, the cost of maintenance, including insurance, on 1951 Allard K2 would be higher. At 3,622 cc (8 cylinders), 1951 Allard K2 is equipped with a bigger engine. In terms of performance, 1951 Allard K2 (85 HP @ 3600 RPM) has 19 more horse power than 1980 Talbot 1510. (66 HP @ 5600 RPM). In normal driving conditions, 1951 Allard K2 should accelerate faster than 1980 Talbot 1510. With that said, vehicle weight also plays an important factor in acceleration. 1951 Allard K2 weights approximately 145 kg more than 1980 Talbot 1510. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1951 Allard K2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1951 Allard K2. However, in wet, icy, snow, or gravel driving conditions, 1980 Talbot 1510, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1951 Allard K2 1980 Talbot 1510
Make Allard Talbot
Model K2 1510
Year Released 1951 1980
Engine Position Front Front
Engine Size 3622 cc 1294 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 85 HP 66 HP
Engine RPM 3600 RPM 5600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 3 seats 5 seats
Vehicle Weight 1195 kg 1050 kg
Vehicle Length 4270 mm 4320 mm
Vehicle Width 1810 mm 1690 mm
Vehicle Height 1580 mm 1400 mm
Wheelbase Size 2700 mm 2610 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]