1951 Austin A 110 vs. 1976 Fiat 130
To start off, 1976 Fiat 130 is newer by 25 year(s). Which means there will be less support and parts availability for 1951 Austin A 110. In addition, the cost of maintenance, including insurance, on 1951 Austin A 110 would be higher. At 3,992 cc (6 cylinders), 1951 Austin A 110 is equipped with a bigger engine. In terms of performance, 1976 Fiat 130 (163 HP @ 5600 RPM) has 33 more horse power than 1951 Austin A 110. (130 HP @ 3800 RPM) In normal driving conditions, 1976 Fiat 130 should accelerate faster than 1951 Austin A 110. With that said, vehicle weight also plays an important factor in acceleration. 1951 Austin A 110 weights approximately 373 kg more than 1976 Fiat 130.
Let's talk about torque, 1951 Austin A 110 (287 Nm @ 2200 RPM) has 32 more torque (in Nm) than 1976 Fiat 130. (255 Nm @ 3400 RPM). This means 1951 Austin A 110 will have an easier job in driving up hills or pulling heavy equipment than 1976 Fiat 130.
Compare all specifications:
| 1951 Austin A 110 | 1976 Fiat 130 | |
| Make | Austin | Fiat |
| Model | A 110 | 130 |
| Year Released | 1951 | 1976 |
| Engine Position | Front | Front |
| Engine Size | 3992 cc | 3238 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 130 HP | 163 HP |
| Engine RPM | 3800 RPM | 5600 RPM |
| Torque | 287 Nm | 255 Nm |
| Torque RPM | 2200 RPM | 3400 RPM |
| Engine Bore Size | 87.3 mm | 102 mm |
| Engine Stroke Size | 111.1 mm | 66 mm |
| Fuel Type | Gasoline | Gasoline |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1975 kg | 1602 kg |
| Vehicle Length | 4880 mm | 4850 mm |
| Vehicle Width | 1860 mm | 1770 mm |
| Vehicle Height | 1710 mm | 1380 mm |
| Wheelbase Size | 3040 mm | 2730 mm |
| Fuel Tank Capacity | 34 L | 50 L |
