1951 Austin A 110 vs. 1980 Fiat 128
To start off, 1980 Fiat 128 is newer by 29 year(s). Which means there will be less support and parts availability for 1951 Austin A 110. In addition, the cost of maintenance, including insurance, on 1951 Austin A 110 would be higher. At 3,992 cc (6 cylinders), 1951 Austin A 110 is equipped with a bigger engine. In terms of performance, 1951 Austin A 110 (130 HP @ 3800 RPM) has 77 more horse power than 1980 Fiat 128. (53 HP @ 6000 RPM). In normal driving conditions, 1951 Austin A 110 should accelerate faster than 1980 Fiat 128. With that said, vehicle weight also plays an important factor in acceleration. 1951 Austin A 110 weights approximately 1100 kg more than 1980 Fiat 128. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1951 Austin A 110 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1951 Austin A 110. However, in wet, icy, snow, or gravel driving conditions, 1980 Fiat 128, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1951 Austin A 110 | 1980 Fiat 128 | |
Make | Austin | Fiat |
Model | A 110 | 128 |
Year Released | 1951 | 1980 |
Engine Position | Front | Front |
Engine Size | 3992 cc | 1116 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 130 HP | 53 HP |
Engine RPM | 3800 RPM | 6000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1975 kg | 875 kg |
Vehicle Length | 4880 mm | 3880 mm |
Vehicle Width | 1860 mm | 1600 mm |