1951 Austin A 110 vs. 1995 De Tomaso Guara

To start off, 1995 De Tomaso Guara is newer by 44 year(s). Which means there will be less support and parts availability for 1951 Austin A 110. In addition, the cost of maintenance, including insurance, on 1951 Austin A 110 would be higher. At 3,992 cc (6 cylinders), 1951 Austin A 110 is equipped with a bigger engine. In terms of performance, 1995 De Tomaso Guara (282 HP @ 5500 RPM) has 152 more horse power than 1951 Austin A 110. (130 HP @ 3800 RPM) In normal driving conditions, 1995 De Tomaso Guara should accelerate faster than 1951 Austin A 110. With that said, vehicle weight also plays an important factor in acceleration. 1951 Austin A 110 weights approximately 800 kg more than 1995 De Tomaso Guara.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 De Tomaso Guara (402 Nm @ 4500 RPM) has 115 more torque (in Nm) than 1951 Austin A 110. (287 Nm @ 2200 RPM). This means 1995 De Tomaso Guara will have an easier job in driving up hills or pulling heavy equipment than 1951 Austin A 110.

Compare all specifications:

1951 Austin A 110 1995 De Tomaso Guara
Make Austin De Tomaso
Model A 110 Guara
Year Released 1951 1995
Engine Position Front Middle
Engine Size 3992 cc 3982 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 130 HP 282 HP
Engine RPM 3800 RPM 5500 RPM
Torque 287 Nm 402 Nm
Torque RPM 2200 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Vehicle Weight 1975 kg 1175 kg
Vehicle Length 4880 mm 4200 mm
Vehicle Width 1860 mm 2040 mm
Vehicle Height 1710 mm 1210 mm
Wheelbase Size 3040 mm 2620 mm