1951 Austin A 110 vs. 2008 Subaru Impreza

To start off, 2008 Subaru Impreza is newer by 57 year(s). Which means there will be less support and parts availability for 1951 Austin A 110. In addition, the cost of maintenance, including insurance, on 1951 Austin A 110 would be higher. At 3,992 cc (6 cylinders), 1951 Austin A 110 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1951 Austin A 110 weights approximately 640 kg more than 2008 Subaru Impreza.

Because 2008 Subaru Impreza is four wheel drive (4WD), it will have significant more traction and grip than 1951 Austin A 110. In wet, icy, snow, or gravel driving conditions, 2008 Subaru Impreza will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1951 Austin A 110 (287 Nm @ 2200 RPM) has 101 more torque (in Nm) than 2008 Subaru Impreza. (186 Nm @ 3200 RPM). This means 1951 Austin A 110 will have an easier job in driving up hills or pulling heavy equipment than 2008 Subaru Impreza.

Compare all specifications:

1951 Austin A 110 2008 Subaru Impreza
Make Austin Subaru
Model A 110 Impreza
Year Released 1951 2008
Engine Position Front Front
Engine Size 3992 cc 1994 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line boxer
Valves per Cylinder 2 valves 4 valves
Horse Power 130 HP 0 HP
Torque 287 Nm 186 Nm
Torque RPM 2200 RPM 3200 RPM
Engine Bore Size 87.3 mm 92.1 mm
Engine Stroke Size 111.1 mm 75 mm
Engine Compression Ratio 6.8:1 11.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1975 kg 1335 kg
Vehicle Length 4880 mm 4590 mm
Vehicle Width 1860 mm 1750 mm
Vehicle Height 1710 mm 1450 mm
Wheelbase Size 3040 mm 2530 mm
Fuel Tank Capacity 34 L 60 L