1951 Austin A 110 vs. 2013 Chevrolet Traverse
To start off, 2013 Chevrolet Traverse is newer by 62 year(s). Which means there will be less support and parts availability for 1951 Austin A 110. In addition, the cost of maintenance, including insurance, on 1951 Austin A 110 would be higher. At 3,992 cc (6 cylinders), 1951 Austin A 110 is equipped with a bigger engine. In terms of performance, 2013 Chevrolet Traverse (277 HP @ 6300 RPM) has 147 more horse power than 1951 Austin A 110. (130 HP @ 3800 RPM) In normal driving conditions, 2013 Chevrolet Traverse should accelerate faster than 1951 Austin A 110. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chevrolet Traverse weights approximately 166 kg more than 1951 Austin A 110. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1951 Austin A 110 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1951 Austin A 110. However, in wet, icy, snow, or gravel driving conditions, 2013 Chevrolet Traverse, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chevrolet Traverse (361 Nm @ 3400 RPM) has 74 more torque (in Nm) than 1951 Austin A 110. (287 Nm @ 2200 RPM). This means 2013 Chevrolet Traverse will have an easier job in driving up hills or pulling heavy equipment than 1951 Austin A 110. 2013 Chevrolet Traverse has automatic transmission and 1951 Austin A 110 has manual transmission. 1951 Austin A 110 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chevrolet Traverse will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1951 Austin A 110 | 2013 Chevrolet Traverse | |
| Make | Austin | Chevrolet |
| Model | A 110 | Traverse |
| Year Released | 1951 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 3992 cc | 3600 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 130 HP | 277 HP |
| Engine RPM | 3800 RPM | 6300 RPM |
| Torque | 287 Nm | 361 Nm |
| Torque RPM | 2200 RPM | 3400 RPM |
| Engine Bore Size | 87.3 mm | 94 mm |
| Engine Stroke Size | 111.1 mm | 85 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 6-speed automatic |
| Number of Seats | 5 seats | 7 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 1975 kg | 2141 kg |
| Vehicle Length | 4880 mm | 5173 mm |
| Vehicle Width | 1860 mm | 1991 mm |
| Vehicle Height | 1710 mm | 1846 mm |
| Wheelbase Size | 3040 mm | 3020 mm |
| Fuel Tank Capacity | 34 L | 83 L |
