1951 Austin A 70 vs. 1948 Simca 5
To start off, 1951 Austin A 70 is newer by 3 year(s). Which means there will be less support and parts availability for 1948 Simca 5. In addition, the cost of maintenance, including insurance, on 1948 Simca 5 would be higher. At 2,198 cc (4 cylinders), 1951 Austin A 70 is equipped with a bigger engine. In terms of performance, 1951 Austin A 70 (66 HP @ 3700 RPM) has 52 more horse power than 1948 Simca 5. (14 HP @ 4000 RPM). In normal driving conditions, 1951 Austin A 70 should accelerate faster than 1948 Simca 5. With that said, vehicle weight also plays an important factor in acceleration. 1951 Austin A 70 weights approximately 720 kg more than 1948 Simca 5. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1951 Austin A 70 | 1948 Simca 5 | |
| Make | Austin | Simca |
| Model | A 70 | 5 |
| Year Released | 1951 | 1948 |
| Engine Position | Front | Front |
| Engine Size | 2198 cc | 570 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 66 HP | 14 HP |
| Engine RPM | 3700 RPM | 4000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Number of Doors | 3 doors | 2 doors |
| Vehicle Weight | 1280 kg | 560 kg |
| Vehicle Length | 4260 mm | 3220 mm |
| Vehicle Width | 1770 mm | 1280 mm |
| Vehicle Height | 1670 mm | 1350 mm |
| Wheelbase Size | 2520 mm | 2010 mm |
