1951 Austin A 70 vs. 2008 BMW 530
To start off, 2008 BMW 530 is newer by 57 year(s). Which means there will be less support and parts availability for 1951 Austin A 70. In addition, the cost of maintenance, including insurance, on 1951 Austin A 70 would be higher. At 2,992 cc (6 cylinders), 2008 BMW 530 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 530 weights approximately 310 kg more than 1951 Austin A 70.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 530 (480 Nm @ 1750 RPM) has 323 more torque (in Nm) than 1951 Austin A 70. (157 Nm @ 1700 RPM). This means 2008 BMW 530 will have an easier job in driving up hills or pulling heavy equipment than 1951 Austin A 70.
Compare all specifications:
1951 Austin A 70 | 2008 BMW 530 | |
Make | Austin | BMW |
Model | A 70 | 530 |
Year Released | 1951 | 2008 |
Engine Position | Front | Front |
Engine Size | 2198 cc | 2992 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 66 HP | 0 HP |
Torque | 157 Nm | 480 Nm |
Torque RPM | 1700 RPM | 1750 RPM |
Engine Bore Size | 79.4 mm | 84 mm |
Engine Stroke Size | 111.1 mm | 90 mm |
Engine Compression Ratio | 6.8:1 | 17.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 3 doors | 5 doors |
Vehicle Weight | 1280 kg | 1590 kg |
Vehicle Length | 4260 mm | 4870 mm |
Vehicle Height | 1670 mm | 1470 mm |
Wheelbase Size | 2520 mm | 2890 mm |
Fuel Tank Capacity | 56 L | 70 L |