1951 Austin A 70 vs. 2008 Fiat Palio
To start off, 2008 Fiat Palio is newer by 57 year(s). Which means there will be less support and parts availability for 1951 Austin A 70. In addition, the cost of maintenance, including insurance, on 1951 Austin A 70 would be higher. At 2,198 cc (4 cylinders), 1951 Austin A 70 is equipped with a bigger engine.
Because 1951 Austin A 70 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1951 Austin A 70. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Palio, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1951 Austin A 70 (157 Nm @ 1700 RPM) has 55 more torque (in Nm) than 2008 Fiat Palio. (102 Nm @ 3250 RPM). This means 1951 Austin A 70 will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Palio.
Compare all specifications:
1951 Austin A 70 | 2008 Fiat Palio | |
Make | Austin | Fiat |
Model | A 70 | Palio |
Year Released | 1951 | 2008 |
Engine Position | Front | Front |
Engine Size | 2198 cc | 1241 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 66 HP | 0 HP |
Torque | 157 Nm | 102 Nm |
Torque RPM | 1700 RPM | 3250 RPM |
Engine Bore Size | 79.4 mm | 70.8 mm |
Engine Stroke Size | 111.1 mm | 78.9 mm |
Engine Compression Ratio | 6.8:1 | 9.1:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 3 doors | 3 doors |
Vehicle Length | 4260 mm | 3550 mm |
Vehicle Height | 1670 mm | 1490 mm |
Wheelbase Size | 2520 mm | 2370 mm |
Fuel Tank Capacity | 56 L | 47 L |