1951 Ford Vedette vs. 1974 Humber Sceptre
To start off, 1974 Humber Sceptre is newer by 23 year(s). Which means there will be less support and parts availability for 1951 Ford Vedette. In addition, the cost of maintenance, including insurance, on 1951 Ford Vedette would be higher. At 2,158 cc (8 cylinders), 1951 Ford Vedette is equipped with a bigger engine. In terms of performance, 1974 Humber Sceptre (79 HP @ 5200 RPM) has 13 more horse power than 1951 Ford Vedette. (66 HP @ 4400 RPM) In normal driving conditions, 1974 Humber Sceptre should accelerate faster than 1951 Ford Vedette. With that said, vehicle weight also plays an important factor in acceleration. 1951 Ford Vedette weights approximately 136 kg more than 1974 Humber Sceptre.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1974 Humber Sceptre (123 Nm @ 3600 RPM) has 1 more torque (in Nm) than 1951 Ford Vedette. (122 Nm @ 2500 RPM). This means 1974 Humber Sceptre will have an easier job in driving up hills or pulling heavy equipment than 1951 Ford Vedette.
Compare all specifications:
1951 Ford Vedette | 1974 Humber Sceptre | |
Make | Ford | Humber |
Model | Vedette | Sceptre |
Year Released | 1951 | 1974 |
Engine Position | Front | Front |
Engine Size | 2158 cc | 1725 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 66 HP | 79 HP |
Engine RPM | 4400 RPM | 5200 RPM |
Torque | 122 Nm | 123 Nm |
Torque RPM | 2500 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1128 kg | 992 kg |
Vehicle Length | 4680 mm | 4310 mm |
Vehicle Width | 1730 mm | 1620 mm |
Vehicle Height | 1530 mm | 1430 mm |
Wheelbase Size | 2700 mm | 2510 mm |