1951 GAZ M-20 vs. 2008 Mazda 6

To start off, 2008 Mazda 6 is newer by 57 year(s). Which means there will be less support and parts availability for 1951 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1951 GAZ M-20 would be higher. At 2,261 cc (4 cylinders), 2008 Mazda 6 is equipped with a bigger engine. In terms of performance, 2008 Mazda 6 (164 HP @ 6500 RPM) has 113 more horse power than 1951 GAZ M-20. (51 HP @ 3600 RPM) In normal driving conditions, 2008 Mazda 6 should accelerate faster than 1951 GAZ M-20. With that said, vehicle weight also plays an important factor in acceleration. 1951 GAZ M-20 weights approximately 45 kg more than 2008 Mazda 6.

Because 1951 GAZ M-20 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1951 GAZ M-20. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 6 (207 Nm @ 4000 RPM) has 82 more torque (in Nm) than 1951 GAZ M-20. (125 Nm @ 2200 RPM). This means 2008 Mazda 6 will have an easier job in driving up hills or pulling heavy equipment than 1951 GAZ M-20.

Compare all specifications:

1951 GAZ M-20 2008 Mazda 6
Make GAZ Mazda
Model M-20 6
Year Released 1951 2008
Engine Size 2120 cc 2261 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 51 HP 164 HP
Engine RPM 3600 RPM 6500 RPM
Torque 125 Nm 207 Nm
Torque RPM 2200 RPM 4000 RPM
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Manual Manual
Vehicle Weight 1460 kg 1415 kg
Vehicle Length 4670 mm 4690 mm
Vehicle Width 1900 mm 1790 mm
Vehicle Height 1650 mm 1440 mm
Wheelbase Size 2710 mm 2680 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]