1952 Abarth 1500 vs. 1958 Austin A135
To start off, 1958 Austin A135 is newer by 6 year(s). Which means there will be less support and parts availability for 1952 Abarth 1500. In addition, the cost of maintenance, including insurance, on 1952 Abarth 1500 would be higher. At 3,993 cc (6 cylinders), 1958 Austin A135 is equipped with a bigger engine. In terms of performance, 1958 Austin A135 (150 HP @ 4100 RPM) has 75 more horse power than 1952 Abarth 1500. (75 HP @ 5700 RPM) In normal driving conditions, 1958 Austin A135 should accelerate faster than 1952 Abarth 1500. With that said, vehicle weight also plays an important factor in acceleration. 1958 Austin A135 weights approximately 1210 kg more than 1952 Abarth 1500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1952 Abarth 1500 | 1958 Austin A135 | |
| Make | Abarth | Austin |
| Model | 1500 | A135 |
| Year Released | 1952 | 1958 |
| Engine Position | Front | Front |
| Engine Size | 1479 cc | 3993 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 75 HP | 150 HP |
| Engine RPM | 5700 RPM | 4100 RPM |
| Engine Bore Size | 84 mm | 87.3 mm |
| Engine Stroke Size | 66 mm | 111.1 mm |
| Engine Compression Ratio | 9.0:1 | 7.6:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 870 kg | 2080 kg |
| Vehicle Length | 3630 mm | 5110 mm |
| Vehicle Height | 950 mm | 1680 mm |
| Wheelbase Size | 2640 mm | 3100 mm |
