1952 Abarth 1500 vs. 1993 Italdesign Nazca
To start off, 1993 Italdesign Nazca is newer by 41 year(s). Which means there will be less support and parts availability for 1952 Abarth 1500. In addition, the cost of maintenance, including insurance, on 1952 Abarth 1500 would be higher. At 4,988 cc (12 cylinders), 1993 Italdesign Nazca is equipped with a bigger engine. In terms of performance, 1993 Italdesign Nazca (346 HP @ 5200 RPM) has 271 more horse power than 1952 Abarth 1500. (75 HP @ 5700 RPM) In normal driving conditions, 1993 Italdesign Nazca should accelerate faster than 1952 Abarth 1500. With that said, vehicle weight also plays an important factor in acceleration. 1993 Italdesign Nazca weights approximately 130 kg more than 1952 Abarth 1500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1952 Abarth 1500 | 1993 Italdesign Nazca | |
| Make | Abarth | Italdesign |
| Model | 1500 | Nazca |
| Year Released | 1952 | 1993 |
| Body Type | Coupe | Coupe |
| Engine Position | Front | Middle |
| Engine Size | 1479 cc | 4988 cc |
| Engine Cylinders | 4 cylinders | 12 cylinders |
| Engine Type | in-line | V |
| Horse Power | 75 HP | 346 HP |
| Engine RPM | 5700 RPM | 5200 RPM |
| Fuel Type | Gasoline | Gasoline |
| Top Speed | 180 km/hour | 297 km/hour |
| Drive Type | Rear | Rear |
| Number of Seats | 2 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 870 kg | 1000 kg |
| Vehicle Length | 3630 mm | 4400 mm |
| Vehicle Height | 950 mm | 1110 mm |
| Wheelbase Size | 2640 mm | 2610 mm |
