1952 Allard K3 vs. 2008 Ford Mustang

To start off, 2008 Ford Mustang is newer by 56 year(s). Which means there will be less support and parts availability for 1952 Allard K3. In addition, the cost of maintenance, including insurance, on 1952 Allard K3 would be higher. At 4,606 cc (8 cylinders), 2008 Ford Mustang is equipped with a bigger engine. In terms of performance, 2008 Ford Mustang (300 HP @ 5750 RPM) has 205 more horse power than 1952 Allard K3. (95 HP @ 3800 RPM) In normal driving conditions, 2008 Ford Mustang should accelerate faster than 1952 Allard K3. With that said, vehicle weight also plays an important factor in acceleration. 1952 Allard K3 weights approximately 64 kg more than 2008 Ford Mustang.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford Mustang (434 Nm @ 4500 RPM) has 216 more torque (in Nm) than 1952 Allard K3. (218 Nm @ 1800 RPM). This means 2008 Ford Mustang will have an easier job in driving up hills or pulling heavy equipment than 1952 Allard K3.

Compare all specifications:

1952 Allard K3 2008 Ford Mustang
Make Allard Ford
Model K3 Mustang
Year Released 1952 2008
Engine Position Front Front
Engine Size 3622 cc 4606 cc
Engine Cylinders 8 cylinders 8 cylinders
Engine Type V V
Horse Power 95 HP 300 HP
Engine RPM 3800 RPM 5750 RPM
Torque 218 Nm 434 Nm
Torque RPM 1800 RPM 4500 RPM
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 3 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1180 kg 1116 kg
Vehicle Length 4500 mm 4770 mm
Vehicle Width 1680 mm 1890 mm
Vehicle Height 1380 mm 1390 mm
Wheelbase Size 2550 mm 2730 mm
Fuel Tank Capacity 59 L 61 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]