1952 Aston Martin DB3 vs. 2009 Mercedes-Benz E

To start off, 2009 Mercedes-Benz E is newer by 57 year(s). Which means there will be less support and parts availability for 1952 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1952 Aston Martin DB3 would be higher. At 2,987 cc, 2009 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2009 Mercedes-Benz E (221 HP @ 3800 RPM) has 83 more horse power than 1952 Aston Martin DB3. (138 HP @ 5500 RPM) In normal driving conditions, 2009 Mercedes-Benz E should accelerate faster than 1952 Aston Martin DB3. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercedes-Benz E weights approximately 1825 kg more than 1952 Aston Martin DB3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mercedes-Benz E (540 Nm @ 1600 RPM) has 297 more torque (in Nm) than 1952 Aston Martin DB3. (243 Nm @ 5500 RPM). This means 2009 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 1952 Aston Martin DB3.

Compare all specifications:

1952 Aston Martin DB3 2009 Mercedes-Benz E
Make Aston Martin Mercedes-Benz
Model DB3 E
Year Released 1952 2009
Engine Position Front Front
Engine Size 2922 cc 2987 cc
Valves per Cylinder 2 valves 4 valves
Horse Power 138 HP 221 HP
Engine RPM 5500 RPM 3800 RPM
Torque 243 Nm 540 Nm
Torque RPM 5500 RPM 1600 RPM
Fuel Type Gasoline Diesel
Drive Type Rear Rear
Number of Seats 2 seats 5 seats
Vehicle Weight 1005 kg 2830 kg
Vehicle Width 1510 mm 1490 mm