1952 Austin A 40 vs. 1967 MG MGC
To start off, 1967 MG MGC is newer by 15 year(s). Which means there will be less support and parts availability for 1952 Austin A 40. In addition, the cost of maintenance, including insurance, on 1952 Austin A 40 would be higher. At 2,912 cc (6 cylinders), 1967 MG MGC is equipped with a bigger engine. In terms of performance, 1967 MG MGC (148 HP @ 5250 RPM) has 110 more horse power than 1952 Austin A 40. (38 HP @ 4300 RPM) In normal driving conditions, 1967 MG MGC should accelerate faster than 1952 Austin A 40.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 MG MGC (174 Nm @ 3500 RPM) has 94 more torque (in Nm) than 1952 Austin A 40. (80 Nm @ 2300 RPM). This means 1967 MG MGC will have an easier job in driving up hills or pulling heavy equipment than 1952 Austin A 40.
Compare all specifications:
1952 Austin A 40 | 1967 MG MGC | |
Make | Austin | MG |
Model | A 40 | MGC |
Year Released | 1952 | 1967 |
Engine Position | Front | Front |
Engine Size | 1200 cc | 2912 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 38 HP | 148 HP |
Engine RPM | 4300 RPM | 5250 RPM |
Torque | 80 Nm | 174 Nm |
Torque RPM | 2300 RPM | 3500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Length | 3890 mm | 4530 mm |
Vehicle Height | 1620 mm | 1530 mm |
Wheelbase Size | 2360 mm | 2560 mm |